Sysprep Archive

Sysprep Windows 10 Machine: Step by Step Guide

In this article we will show you how to use PowerShell and Windows System Preparation Tool to prepare a highly customized, personal Windows 10 install image. Before starting the installation, we need to make sure that our computer or virtual machine is not connected to network, because Windows 10

Install WAIK supplement for Windows 7 SP1

WAIK Supplement These are instructions for installing the new The Windows Automated Installation Kit (AIK) for Windows 7 SP1. This is assuming that you have WAIK RTM already installed. Step 1 First you need to download the supplement ISO. waik_supplement_en-us.iso Step 2 Now you need to mount the WAIK

Sysprep a Windows 7 Machine – Start to Finish V2

This is version 2 of a step by step guide on Sysprepping a Windows 7 machine from start to finish. I cannot take full credit on this because my first article had so many helpful comments and discussions that this is simply a combination of all the good advice

Copy Taskbar Icons Windows 7 Sysprep v2

Sysprep – Copy Taskbar Icons Ok, you can thank a colleague of mine (Dinyero Johnson) for this new single vbs script that now copies the taskbar icons and deletes itself. The vbs script is a little nicer than version one (CMD) because it runs without any windows and in

Trouble deleting c:\winpe_x86 directory – DISM

If you forget to unmount a .WIM file it will lock itself on your HDD and you will be unable to delete it, or the C:\winpe_x86 directory. This process will remove those files using the command line. Trouble deleting the c:winpe_x86 directory Step 1 Launch CMD. Step 2 Type:

WinPE 3.1 Scripts

WinPE 3.1 Scripts This latest version was compiled on September 27th, 2012. This is the third update to our WinPE scripts. Please read our tutorial on DISM for using the files below to compile a functioning WinPE 3.1 environment. And also I would recommend reading our tutorial on Making

Formatting WinPE 3.1 Flash Drive – (DISM)

In my previous article I wrote about how to create the WinPE 3.1 environment, add drivers, mount the .WIM file, add batch scripts, etc. Here are the steps for creating the bootable flash drive. Step 1 Open up Command Prompt. You can do the first step within a normal

DISM Tool – WinPE 3.1 Boot Environment

This is the new tutorial for the recent release of WinPE 3.1. You can still read the old tutorial here. DISM Tool You will need the following to proceed: WAIK RTM : KB3AIK_EN.iso Version 3.0 (Read our Tutorial) Supplement for WAIK SP1 : waik_supplement_en-us.iso (Read our Tutorial) Bootable Flash

Install WAIK RTM for Windows 7

These are basic instructions for installing the Windows Automated Installation Kit (AIK) for Windows 7. Installing the Windows Automated Installation Kit (AIK) (Windows 7) Step 1 Download the WAIK RTM client (KB3AIK_EN.iso) for Windows 7. Step 2 Either mount the ISO with Pismo Mount or extract it with 7-zip.

Sysprep a Windows 7 Machine – Start to Finish

This is the old version, please see the new Sysprep a Windows 7 Machine – Start to Finish V2. Note – I highly recommend creating a boot or rescue disk before starting any windows 7 technical projects. There are many tools in the market and I use Spotmau BootSuite